¶ MP031 - Part 031
Fuse module between cell 1 and cell 2
¶ Composition
- Red CU wire 4mm2
- Fuse 25A
- 2x Ring cable lug 6 mm, crimped, soldered in advance
¶ Parameters
- Maximum rated current: 30A
- Maximum rated voltage: 14,5V DC
- Maximum rated current: 25A DC
- Short current: NO LIMIT!!.
¶ Warnings: 
Wire can't not be protected by switch when manipulated with!
Short connecting this cable can cause serious injury and fire!
When repairing this part replace only the fuse via soldering and not the whole cable.
¶ Replacing the fuse
First remove the heat shrink tubes, afterwards heat the contacts with a soldering iron and remove the fuse. Now slide new heat shrink tubes onto the cables, but don't heat them yet. Solder on a new fuse, slide the heat shrink tubes onto the contacts and heat them until they shrink and hold firmly.
¶ Image
¶ Location
¶ QR code
¶ PNG
¶ SVG
¶ Connections
| Pole | Connection | Target |
|---|---|---|
| A | Red Wire & Thin Red Wire - cell 1 | LiFePO4 battery cell 1 & BMS |
| B | Red Wire | LiFePO4 battery cell 2 |
¶ Label
¶ Data
description: Fuse module 1
¶ Image
